bBQ2058WSN : Lithium Ion Pack Supervisor For 3- And 4-cell Packs. Protects and individually monitors three or four Li-Ion series cells for overvoltage, undervoltage Monitors pack for overcurrent Designed for battery pack integration Minimal external components Drives external FET switches Selectable overvoltage OV ) thresholds The bq2058 Lithium Ion Pack Supervisor is designed to control the charge and discharge cell.
HIP6005 : Buck Pulse-width Modulator. Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor The HIP6005 provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive an N-Channel MOSFET in a standard buck topology. The HIP6005 integrates all of the control, output adjustment, monitoring.
ILC6376SO33 : 0.5A, 300kHz, SO-8 Pwm/pfm Step Down Converter With Shutdown. 300kHz, SO-8 PWM/PFM Step Down Converter with Shutdown ±2.5% accurate output voltages Guaranteed 500mA output current 95% efficiency 55µA no load battery input current (ILC6377) 1.5µA shutdown current Built in short circuit and overcurrent protection Undervoltage lockout and soft-start External transistor drive available for higher IOUT 300kHz operation.
ISL6801 : broadband power. High Voltage Bootstrap High Side Driver. High Voltage Bootstrap High Side Driver The is a single monolithic, inverting bootstrap driver. Its floating Level Shifter Section is optimized for the control of N-Channel Power MOSFETs in high side configurations with Bus Voltages to 120VDC from a 5V Controller Output. It two output stages pinned out separately to allow independent control of rise.
LX8554 : Adjustable. 5a Extremely Low Dropout Positive Regulators. The LX8554 series ICs are very low dropout three-terminal positive regulators with 5A rated output current. This product family is ideally suited for Pentium® Processor and Power PCTM applications requiring fast transient response. The LX8554 is guaranteed to have a dropout voltage under at 5A load, making it ideal to provide well-regulated outputs.
MAX1818EVKIT : MAX1818EVKIT Evaluation Kit For The MAX1818EUT15/MAX1818EUT18/MAX1818EUT20/MAX1818EUT25/MAX1818EUT33/MAX1818EUT50.
MIC5219 : MIC5219 500mA-Peak Output LDO Regulator. The is an efficient linear voltage regulator with high peak output current capability, very low dropout voltage, and better than 1% output voltage accuracy. Dropout is typically 10mV at light loads and less than 500mV at full load. The MIC5219 is designed to provide a peak output current for startup conditions where higher inrush current is demanded.
MTW : . to +85°C operation to 40 VDC input to 40 VDC MTW2805S) Fully Isolated Optocoupler feedback Fixed frequency Topology Push-Pull Forward 50 V for 50 ms transient protection Inhibit function Indefinite short circuit protection Remote sense on MTW2805S model to 86% efficiency Size (max.): x 0.505 inches x 12.83 mm) See Section B8, case J5, for dimensions.
PCF1252 : General Purpose. PCF1252-X Family; Threshold Detector And Reset Generator.
SI-7502 : 5-phase Stepper Motor driver. Part No. Parameter Motor supply voltage Auxiliary supply voltage Control voltage Reference voltage Detection voltage Power dissipation Ambient operating temperature Drain -Source voltage Drain current Avalanche energy capability (Single pulse) Power dissipation Channel temperature Storage temperature Collector-Base voltage Collector-Emitter voltage.
TED0511 : 1-8 Watt. Input Voltage Ranges (VDC) = 4.5-5.5 9-18 18-36 ;; Available Output Voltages (VDC) = 5 12 15 24 12 15 ;; Output Current Max. (mA) = 400 160 130 80 80 65 ;; Package Dimension (mm) = 32 X 20 X 10 (24-Pin DIP) ;; = Smd-technology With Ceramic Capacitors Dual Output Models With Galvanic ISOlated Outputs Metal Case ;;.
TPS70445 : . TPS70458, TPS70402 DUAL-OUTPUT LOW-DROPOUT VOLTAGE REGULATORS WITH INTEGRATED SVS FOR SPLIT VOLTAGE SYSTEMS D Ultralow 185 µA (typ) Quiescent Current Applications 2 µA Input Current During Standby Independent Enable Functions (See Part D Low Noise: 78 µVRMS Without Bypass Number TPS703xx for Sequenced Outputs) Capacitor Output Current Range on D Quick.
TPS70751 : Dual-output Low-dropout Voltage Regulators With Power-up Sequencing For Split Voltage DSP Systems.
UCC3952DP-2 : ti UCC3952-2, Single Cell Lithium-ion Battery Protection ic W/internal Fet And Vov = 4.25V.
TPS79650 : Ultralow Noise, High PSRR, Fast RF 1-A, Low Drpout Linear Regulators * 1A Low-Dropout Regulator With Enable * Available in Fixed and Adjustable (1.2V to 5.5V) Versions * High PSRR (53dB at 10kHz) * Ultralow-Noise (40µVRMS, TPS79630) * Fast Start-Up Time (50µs) * Stable With a 1µF Ceramic Capacitor * Excellent Load/Line Transient Response * Very Low Dropout.
ISL54416 : The Intersil ISL54415, ISL54416, ISL54417 dual SPDT (Single Pole/Double Throw) switches combine low distortion audio/video and accurate USB 2.0 Full Speed data signal switching in the same low voltage device. When operated with a 2.5V to 3.6V single supply these analog switches allow audio/video signal swings below-ground, allowing the use of a common.
LM5006 : 80V, 650 MA Constant On-Time Buck Switching Regulator The LM5006 Step Down Switching Regulator all of the functions needed to implement a low cost, efficient Buck bias regulator. This high voltage regulator contains an 80V N-Channel MOSFET Switch and a startup regulator. The device is easy to implement and is provided in an MSOP-10 package. The regulators.
NCP4688 : 150 MA, Low Noise, LDO Linear Voltage Regulator The NCP4688 is a CMOS 150mA LDO linear voltage regulator with high output voltage accuracy which a low noise output voltage and high ripple rejection. The low level of output noise 10uVrms typically is kept at any output voltage. The very common SOT23-5 package and small uDFN 1x1 package are suitable for industrial.
